Filter
Top Products
60
Setting the pace for a slide show
(INTERVAL)
You can set the time the slides are displayed
on the screen.
1 Press DISPLAY twice.
The Control Menu appears.
2 Press X/x to select
(INTERVAL), then press ENTER.
The options for “INTERVAL” appear.
3 Press X/x to select a setting.
The default setting is underlined.
• NORMAL
: normally select this
position.
• FAST: sets a duration shorter than
NORMAL.
• SLOW1: sets a duration longer than
NORMAL.
• SLOW2: sets a duration longer than
SLOW1.
4 Press ENTER.
Note
Some JPEG files, especially progressive JPEG files
or JPEG files of 3,000,000 pixels or more, may take
longer to display.
Selecting the slides’ appearance
(EFFECT)
You can select the way the slides are
displayed during a slide show.
1 Press DISPLAY twice.
2 Press X/x to select (EFFECT),
then press ENTER.
The options for “EFFECT” appear.
3 Press X/x to select a setting.
The default setting is underlined.
•OFF: turns off this function.
• MODE1: the image sweeps in from top
to bottom.
• MODE2: the image sweeps in from left
to right.
• MODE3: the image stretches out from
the center of the screen.
• MODE4: the images randomly cycle
through the effects.
• MODE5: the next image slides over the
previous image.
4 Press ENTER.
DATA CD
JPEG
NORMAL
NORMAL
FAST
SLOW 1
SLOW 2
2
(
5
)
DATA CD
JPEG
OFF
OFF
MODE 1
MODE 2
2
(
5
)
MODE 3