Filter
Top Products
Getting Started
16
Step 6: Presetting channels with the EASY G-CODE SET UP
function (continued)
To check if the channels are preset correctly
Set the TV to the video channel and press PROGRAM +/– on the VCR. If the
TV screen changes to a different programme each time you press PROGRAM
+/–, the channels are preset correctly.
To check the guide channel setting
Press MENU, then press M/m to move the cursor (B) to SET UP CH AND
G-CODE and press OK. The guide channels for your local area are displayed
on the screen.
Tips
• If your area is not listed in the EASY G-CODE SET UP menu, preset the TV channels
using the One Touch Tuning function or the TUNER PRESET menu (see “Presetting
channels” on page 17). Then set up the G-CODE guide channels manually if you
want to record TV programmes using the G-CODE numbers (see “ Setting up the
G-CODE system manually” on page 23).
• If you want to record satellite broadcast using the G-CODE numbers, see page 25.