Filter
Top Products
Getting Started
26
Changing/
disabling
programme
positions
After setting the channels and G-CODE
guide channels, you can change the
programme positions as you like. If any
programme positions are unused or
contain unwanted channels, you can
disable them.
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
Changing programme positions
e.g. Moving the programme position from 2 to 0.
1 Press MENU, then press M/m to move the
cursor (B) to SET UP CH AND
G-CODE and press OK.
2 Press M/m to move the cursor (B) to the
row on which you want to change the
programme position, then press ,.
To display other pages for programme
positions 5 to 49 (SLV-EZ77AS/EZ66AZ—
When COUNTRY is set to AUS) or 6 to 50
(SLV-EZ77NZ/EZ66AZ— When
COUNTRY is set to NZ), press M/m
repeatedly.
MENU
OK
M/m/</,
e.g. SLV-EZ77AS/EZ66AZ
(COUNTRY is set to AUS)
PLAY
OK
MENU
PLAY
OK
SET UP CH AND G-CODE
PROG CH
SELECT
GUIDE CH
SET GUIDE CH
CONFIRM
–
–
–
–
–
]
[
:
[
]
:
[
]
:
[]
0
1
2
3
4
2
9
10
28
9
10
28
7
2
7
SET UP CH AND G-CODE
PROG CH
SELECT
GUIDE CH
MOVE PROG
ERASE PROG :
–
–
–
–
[ CLEAR ]
:
[]
:
[
]
0
1
2
3
4
2
9
10
28
10
28
7
9
2
7
–