Filter
Top Products
9
Getting Started
Getting Started
IN
OUT
AERIAL
OUT
IN
AERIAL
1 Disconnect the aerial cable from your TV
and connect it to AERIAL IN on the rear
panel of the VCR.
2 Connect AERIAL OUT of the VCR and the
aerial input of your TV using the supplied
aerial cable.
3 Connect the mains lead to the mains.
Step 3
AERIAL IN
AERIAL IN
to mains
Mains lead
: Signal flow
AERIAL OUT
Aerial cable (supplied)
continued
Audio/video cable (not supplied)
LINE-1 OUT
LINE IN
Additional connections
To a TV that has audio/video input
jacks
This additional connection improves
picture and sound quality. Connect
the TV as shown on the right.
If you want to use the Trinitron TV
Synchro Play function (see page 33),
this connection is necessary. (If your
TV has two or more inputs, connect
the audio/video cable to the VIDEO
IN 1 jacks.)
Connecting the VCR
Connect the aerial to your VCR and TV as shown below to watch TV
programmes and VCR pictures on your TV. In addition, if your TV has
audio/video (A/V) input jacks, we recommend you connect the VCR to
your TV using an audio/video cable to get a better picture and sound.
Connecting the aerial
e.g. SLV-EZ77AS/EZ77NZ