Filter
Top Products
47Basic Operations
Basic Operations
PLAY
OK
Tips
• To set the programme position, you can also use the PROG +/– or programme
number buttons.
• To set the tape speed, you can also use the SP/LP (SP/EP) (for SLV-EZ66AZ: SP/
LP) button.
• (For SLV-EZ77AS/EZ77NZ only)
To record NTSC signals, set the tape speed to SP or EP. To set to the EP mode,
display “LP” in the tape speed position.
Note
• The
t
indicator flashes in the display window when you press ?/1 with no tape
inserted.
To record from a source connected to the LINE-1 IN (SLV-EZ77AS/
EZ77NZ: SAT IN/STB IN) or LINE-2 IN (or LINE-3 IN: SLV-
EZ77AS/EZ77NZ only) jacks, press INPUT SELECT or PROG +/–
to display “L1” or “L2” (or “L3”: SLV-EZ77AS/EZ77NZ only) in the
“PROG” position.
3 Press , to confirm the setting.
The cursor (B) appears at the beginning of the line. To enter another
setting, move the cursor to the next line and repeat step 2.
4 Press OK.
5 Press ?/1 to turn off the VCR.
The
t
indicator appears in the display window and the VCR
stands by for recording.
To record from other equipment, leave the connected equipment
switched on.
To stop recording
To stop the VCR while recording, press x STOP.
Daily/weekly recording
In step 2 above, press m to select the recording pattern. Each time you press
m, the indication changes as shown below. Press M to change the indication
in reverse order.
the current date n SU-SA (Sunday to Saturday) n MO-SA (Monday to
Saturday) n MO-FR (Monday to Friday) n EVERY SA..... n EVERY MO n
EVERY SU n 1 month later n(dates count down) n the current date
PLAY
OK
• ]/1