Filter
Top Products
4-3 TC Menu
4-20 Chapter 4 Menu Settings
Chapter 4 Menu Settings
4-3 TC Menu
The TC menu allows you to set time code-related
items through a single menu. The HOME, TC, PF1
and PF2 menus show information that includes the
VTR operation mode, time code of the current
position, and the time code type, etc.
To activate the TC menu
Press the TC button.
To change the TC menu page
Press the ALT button.
TC Menu
VITC: Time code type (LTC/VITC)
TCR: Time data type
(CTL/TCR/UBR/TCG/UBG/DUR)
DF: This appears when drop frame mode data is
being recorded or played (DF/NDF).
F1: Field number (F1/F2)
For details on operation modes, refer to “4-2 HOME
Menu” on page 4-14.
INTRP (interpolation): This appears when time
code cannot be read correctly and correction
has been performed.
Data entry window
AIN: Time data for an AUDIO IN point
AOUT: Time data for an AUDIO OUT point
IN: Time data for an IN point
OUT: Time data for an OUT point
ÅIN 00:01:10:00 ÅOUT 00:02:10:00
PLAY LOCK
TIMER
SEL
TC
CH.COND
GREEN
TC
TCR VITC INTRP DF 2FD F1
IN 00:01:10:00 OUT 00:02:10:00
01Ó 04µ 58ß 00ƒ
TIMER
RESET
TIMER
SET
TIMER
HOLD
TC
SEL
VITC
TCG
SOURCE
int-L
TCG
MODE
prst
RUN
MODE
rec
DF/NDF
DF
VITC
TCG
REMAIN-T
L 113min
TC menu
Button
[F1]
[F2]
[F3]
[F4]
[F5]
[F6]
[F7]
[F8]
[F9]
TIMER SEL
TIMER RESET
TIMER SET
TIMER HOLD
TCR SEL
TCG SOURCE
TCG MODE
RUN MODE
DF/NDF
Function
Selects time data type.
Resets the time counter.
Sets the time data.
Holds the time counter.
Sets the time code reader.
Selects the internal/external time code generator.
Selects the running mode of the time code.
Selects drop frame mode.
Sets the time code generator.
Indication
[F10]
ALT/[F1]
ALT/[F2]
VITC
TAPE TIMER
PDPSET MENU
Selects VITC input source
Selects the CTL display mode.
Activates the PDPSET menu.
ALT/[F3] TC CONV Specifies whether or not to convert the 24F time
code to the 25F time code when playing back the
cassette tape recorded in the 24F mode with the
25F mode.
Settings
CTL, TC, UBIT
VITC, auto, LTC
int-LTC, int-VITC
ext-LTC, ext-VITC
regene, prst, auto
free, rec
DF, NDF, auto
TCG, V IN
+/–12H, 24H
on, off
ALT/[F4] PDTC DISP Specifies whether or not to display pull down time
code.
on, off
ALT/[F5] PD CHARA on, offSpecifies superimposition of character information
to the pull down output.
ALT/[F6] CHARA SUPER
Specifies superimposition of character information
to the HD SDI output and HD-SD converter output.
on, off
ALT/[F7] CHARA H-POS Changes the superimposition position (horizontal). 0-15
ALT/[F8] CHARA V-POS Changes the superimposition position (vertical). 0-23
ALT/[F9]
VITC POS-1 Selects the VITC insertion line in the HD-SD
converter output.
12-20
ALT/[F10] VITC POS-2 12-20