Filter
Top Products
4-3 TC Menu
4-28 Chapter 4 Menu Settings
Chapter 4 Menu Settings
4-3-10 Displaying the Pull Down
Time Code (when HKDV-507 is
installed)
To display the pull down time code, follow the steps
below.
1 Press the TC button, then press the ALT button.
2 Press the [F5] (PDTC DISP) key to select “on”.
on: Displays the pull down time code.
off: Does not display the pull down time code.
T CR.23:59.40.18
*
SHUTTL
E
STILL
3 Drop frame mark of the time
code generator
1 Types of time data
Time data
4 Field mark of the
VITC data
2 Drop frame mark of the time
code reader
PLAY LOCK
TAPE
TIMER
CH.COND
GREEN
ALT+TC
TCR 2FD F1
00Ó 00µ 00ß 00ƒ
PDPSET
MENU
12H
PDTC
DISP
off
TC
CONV
off
PD
CHARA
off
CHARA
SUPER
off
CHARA
H-POS
10
CHARA
V-POS
10
VITC
POS-1
16
VITC
POS-2
16
PD
00Ó 00µ 00ß 00ƒ
ÅIN 00:01:10:00 ÅOUT 00:02:10:00
IN 00:01:20:00 OUT 00:02:20:00
4-3-11 Superimposition of
Character Information (PD
CHARA/CHARA SUPER/H-POS/
V-POS)
To superimpose the characters representing time code
data and operation mode information on the output
signals, use the [F4] (PD CHARA) and [F6] (CHARA
SUPER) buttons.
Contents of superimposed data
Contents of superimposed data
Note
The example above shows the factory-set contents of
data.
By changing the 626.DISPLAY INFORMATION
select setting in the VTR SETUP menu, different types
of information can also be displayed on the second
line.
5 Control VTR indication
Button Setting Connector to which the
characters are superimposed
ALT/[F4] on PULL DOWN OUT connector (on two
connectors)
ALT/[F6] on •HD SDI MONITOR connector
•COMPOSITE (SUPER) connector
of D CONV. OUT(OPTION)
•3(SUPER) of connector D CONV. SDI
OUT(OPTION)
1
2
PLAY LOCK
TAPE
TIMER
CH.COND
GREEN
ALT+TC
TCR 2FD F1
01Ó 04µ 58ß 00ƒ
PDPSET
MENU
12H
PDTC
DISP
off
TC
CONV
off
PD
CHARA
off
CHARA
SUPER
off
CHARA
H-POS
10
CHARA
V-POS
10
VITC
POS-1
16
VITC
POS-2
16
PLÅYER
01Ó 04µ 58ß 00ƒ
ÅIN 00:01:10:00 ÅOUT 00:02:10:00
IN 00:01:20:00 OUT 00:02:20:00
ÅIN 00:01:10:00 ÅOUT 00:02:10:00
IN 00:01:20:00 OUT 00:02:20:00