Filter
Top Products
Chapter 5 Recording/Playback 5-9
Chapter 5 Recording/Playback
5-3-5 Improving the Vertical
Resolution during Slow-Motion
Playback (when HKDV-502 is
installed)
When the optional HKDV-502 HD Line Converter
Board is installed in the HDW-F500, to activate the
function to improve the vertical resolution during
slow-motion playback, follow the procedure below.
1 Press the MAINTENANCE switch using the tip of
a small pointed object.
2 Press the [F8](MAINTE EXEC) button while
holding down the SFT button.
3 Press the [F9](OTHERS CHECK) button.
4 Press the [F9](SYSTEM MENU) button.
5 Press the [F1](ACTIVE LINE) button to select off.
Pressing the button cycles the settings from 1035,
1080, off.
1035 and 1080 are used to activate the function to
convert the effective scanning line number.
6 Press the [F9](EXEC).
A message asking you to confirm the operation
appears in the display.
To cancel the excusion
Press the [F8](CANCEL) button.
7 Press the [F9](EXEC).
The HDW-F500 is restarted automatically.
8 Press the SET UP button.
The VTR SETUP menu appears in the display.
9 Select on in the
732.SLOW PROCESS MODE of
the VTR SETUP menu.
on: Improve the vertical resolution during slow-
motion playback.
off: Do not improve the vertical resolution during
slow-motion playback.
CH.COND
MAINTENANCE
ROM
MAINT
PANEL
MAINT
SERVO
CHECK
A/V
CHECK
OTHERS
CHECK
RF
CHECK
DT/SAT
CHECK
EXIT
TCR 00:00:00:00
MAINTENANCE
OPERATION
DRUM RUNNING
THREADING
TAPE TRAVEL
529HOURS
34HOURS
20HOURS
780TIMES
[ 26H]
[ 16H]
[ 449H]
OTHERS CHECK
CH.COND
OTHERS CHK
MEMORY
CHECK
NVRAM
CTL
RS232C
STATUS
M-HEAD
ROOM
HOURS
METER
PAPA-I
SETUP
PAPA-O
SETUP
SYSTEM
MENU
EXIT
TCR 00:00:00:00
MAINTENANCE INFOMATION DISPLAY
OPERATION
CH.COND
MAINTE INFO
ERR
LOG
ROM
VER
MAINTE
EXEC
OPTION
INFO
EXIT
TCR 00:00:00:00
DRUM RUNNING
THREADING
TAPE TRAVEL
529HOURS
34HOURS
20HOURS
780TIMES
[ 26H]
[ 16H]
[ 449H]
OPERATION INFO
FREQ: 59.94i
LINE:1080 1035(CONV)
i
[F1]1080 1035 (CONVERT)
CH.COND
SYSTEM MENU
SYSTEM
FREQ
ACTIVE
LINE
D-CONV
SDI
EXIT
EXEC
CANCEL
[F2]SYSTEM FREQUENCY
[F8]Cancel
[F3]SDI OUT. ( D1 / D2 )
SYSTEM MENU
[F9]Execute of Reset VTR System.
with conditions
STOP & not STANDBY
EJECT Tape.
off
MODE7
D1
MODE7 59.94i