Filter
Top Products
14
Connecting the VCR
Step 3 : Connecting the VCR
If your TV has a PERITEL connector, see page 15.
• Connection to your TV with an aerial cable only, see this page.
• Connection to your TV and Set-Top Box, see page 17.
• Connection to your TV and decoder, see page 47.
If your TV does not have a PERITEL connector
Note
• When you connect the VCR and your TV only with an aerial cable, you have to
tune your TV to the VCR (see page 20).
1
Disconnect the aerial cable from
your TV and connect it to
ANTENNE ENTREE on the rear
panel of the VCR.
2
Connect ANTENNE SORTIE of
the VCR and the aerial input of
your TV using the supplied aerial
cable.
3
Connect the mains lead to the mains.
Mains lead
ANTENNE
ENTREE
to mains
Aerial cable (supplied)
: Signal flow
ANTENNE ENTREE
ANTENNE SORTIE
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE