Filter
Top Products
18
Connecting the VCR
If your STB has a PERITEL connector
The illustration below shows an example of connecting the STB to DECODEUR/
ENTREE LIGNE-3. In this case, set the CONNEX. STB setting to LIGNE3 (see
page 26).
You can watch programmes from the Set-Top Box connected to this VCR on your TV
even when the VCR is turned off using the Line Through function. When you turn on
the STB, this VCR automatically sends the signal from the STB to the TV without
turning itself on.
Note
• You cannot watch programmes from your STB on the TV while recording unless
you record a programme from your STB.
1
Set DECODEUR/LIGNE3 to LIGNE3 in the OPTIONS-2 menu.
2
Set VEILLE ECO to NON or PARTIELLE in the OPTIONS-2 menu.
3
Turn off the VCR.
To watch a programme from the STB, turn on the STB and the TV.
For details, see page 25.
ANTENNE
SORTIE
PERITEL cable
(supplied with the STB)
PERITEL cable (not supplied)
Aerial cable
(supplied)
STB
STB controller’s
Side view
(supplied)
i
ii
i LIGNE-
1 (TV)
DECODEUR/
t
tt
t ENTREE LIGNE-3
CONTROLEUR
STB
: Signal flow
PERITEL
ANTENNE
ENTREE
ANTENNE
ENTREE