Filter
Top Products
60
Recording TV programmes using the Dial Timer
To return to the previous step
To return to the previous step, press the CHAINE + and – buttons on the
VCR at the same time during any of the Dial Timer settings.
To stop recording
To stop the VCR while recording, press x STOP.
7
Press PROG.
The programme position or station name appears in the display
window.
8
Turn PROG to set the programme position.
To record from a decoder or other source connected to one or more
of the LIGNE inputs, turn PROG or press CHOIX ENTREE to
display the connected line in the display window.
To record from the Set-Top Box, turn PROG or press
CHAINE +/– until the STB channel number you want appears in the
display window. You can change the channel one channel at a time
by turning PROG, or 100 channels at a time by pressing
CHAINE +/–.
9
Press PROG to complete the setting.
“OK” appears in the display window for about five seconds.
The indicator appears in the display window and the VCR stands
by for recording.
To record from a decoder or other source, leave the connected
equipment switched on.
PROG
SP OPC
MAGN
PROG
CHOIX
ENTREE
CHAINE
SP OPC
MAGN
PROG