Filter
Top Products
84
Storing, searching and deleting programme information (Accès Smart Plus)
To exit the ACCES SMART screen
Press ACCES SMART.
Recalling the most recent programme information
Programme information that is not saved in one of the memory bank
numbers is erased when the cassette is ejected. The RAPPEL memory bank
will temporarily memorize the programme information of the last tape used
for recording in case that it is accidentally ejected.
If you re-insert the cassette in step 1 that you accidentally ejected and then
select RAPPEL in step 3, the data for the last tape used to record
programmes appears. Press OK and the latest information will appear on the
ACCES SMART screen. You can then add new information to this
programme list. For an explanation about viewing programme information
without using one of the memory banks, see page 79.
If you want to erase the latest information in the RAPPEL memory bank,
press the ACCES SMART button instead of the OK button in step 3 and then
close the ACCES SMART screen. The new information will replace all of
the current information in the RAPPEL memory bank.
Notes
• When you insert the cassette whose information does not exist on the memory
bank number, you can not search the recorded programme.
• If you exit the ACCES SMART screen with a memory bank number that does not
contain programme information selected, the ACCES SMART screen will not
appear even if you press ACCES SMART.
Deleting the programme information
You can delete the programme information stored in a memory number.
Before you start...
• Turn on your TV and the VCR.
• Set the TV to the video channel.
1
Press ACCES SMART.
The ACCES SMART -RAPPEL- screen
appears.
DATE PROG.
1 2 3 4
21:30 23:004.10
0 18:00 19:00
CDE2.1
IJK
:
REGLER
SELECTIONNER
:
:
OK
HEURE
SORTIE ACCES SMART
ACCES SMART -RAPPEL-
RAPPEL