Filter
Top Products
Getting Started
25
Setting the Set-Top Box
Step 6 : Setting the Set-Top Box
If you did not connect a Set-Top Box (STB), skip this step.
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Connect the STB controller, remove the protection sticker on the STB controller and place it
on top of the STB, so that it hangs out over the infrared receptor on the STB front (see page
17).
• Refer to “Index to parts and controls” for button locations.
1
Press MENU, then press M/m to
highlight REGLAGES and press OK.
2
Press M/m to highlight SET-TOP
BOX, then press OK.
3
Press M/m/</, to highlight
CONNEX. STB and press OK.
MENU
OK
LECTURE
REGLAGES
RETOUR
SET-TOP BOX
HORLOGE
REGLAGE DES CHAINES
LANGUE
MENU:
:
:
OKREGLER
SELECTIONNER
SORTIE
OK
LECTURE
SET-TOP BOX
NONCONNEX. STB
RETOUR
MENU:
:
:
OKREGLER
SELECTIONNER
SORTIE
OK
LECTURE
SET-TOP BOX
NON
RF
LIGNE3
CONNEX. STB
RETOUR
MENU:
SELECTIONNER
SORTIE
:
:
OKCONFIRMER
continued