Filter
Top Products
69
Recording TV programmes using the timer
Basic Operations
To use the VCR after setting the timer
To use the VCR before a recording begins, just press ?/1. The indicator
turns off and the VCR switches on. Remember to press ?/1 to reset the VCR
to recording standby after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 52).
• Display tape information on the TV screen (page 55).
• Check the timer settings (page 75).
• Watch another TV programme (page 55).
Tips
• To set the programme position, you can also use the CHAINE +/– or programme
number buttons.
• To set the programme position with a two digit number, press - (ten’s digit)
button followed by the programme number buttons.
• To set the line input video source, you can also use the CHAINE +/– buttons.
• To set the tape speed, you can also use the SP/LP button.
• When you are recording a programme in the SP mode and the remaining tape
becomes shorter than the recording time, the tape speed is automatically changed
to the LP mode. Note that some interference will appear on the picture at the point
the tape speed is changed. If you want to keep the same tape speed, set VITESSE
AUTO. to NON in the OPTIONS-1 menu (see page 91).
• Even if you set OPTIONS PROGRAMM. to SHOWVIEW in the OPTIONS-2
menu, you can set the timer manually. Press MENU to select MINUTERIE, then
go to step 2.
• To check, change, or cancel the programme setting, press </, to choose LISTE,
then press OK in step 2. For details, see step 3 in “Checking/changing/cancelling
timer settings” on page 75.
Notes
• When setting the timer with VPS/PDC signals, enter the start and stop times
exactly as indicated in the TV programme guide. Otherwise, the VPS/PDC
function will not work.
• If the VPS/PDC signal is too weak or the broadcasting station failed to transmit
VPS/PDC signals, the VCR will start recording at the set time without using the
VPS/PDC function.
• The indicator flashes in the display window when you press ?/1 with no tape
inserted.
• The VPS/PDC function is automatically set to NON for the timer recording of a
programme from your Set-Top Box.
• The station name may not appear if the VCR does not receive station name
information signals.