Filter
Top Products
85
Storing, searching and deleting programme information (Accès Smart Plus)
Additional Operations
Note
• You cannot use or return the deleted information.
About the Demonstration Mode
The Accès Smart Plus function has a Demonstration Mode that allows the user, such
as a salesperson, to automatically display the Accès Smart Plus screens.
To activate the Demonstration Mode
While the VCR is turned on, press and hold the both x (stop) and A (eject)
buttons on the VCR
for a few seconds. The demonstration will start and the
four kinds of Accès Smart Plus screens will be displayed repeatedly. If you
operate the VCR, the Demonstration Mode temporarily stops. After about
five minutes, the demonstration will restart.
To cancel the Demonstration Mode
While the VCR is turned off, press and hold the both x (stop) and A (eject)
buttons on the VCR
for a few seconds. You can also cancel the
Demonstration Mode if you turn the power off and unplug the mains lead.
2
Press </, to select the memory bank
number to delete.
The programme information on the
selected memory bank number appears.
Check the information that you want to
delete.
3
Press ANNUL/0.
The programme information is deleted.
4
Press ACCES SMART.
The ACCES SMART screen disappears.
:
REGLER
SELECTIONNER
ACCES SMART -RAPPEL-
:
:
OK
DATE HEURE PROG.
RAPPEL 1 2 3 4
20:00 21:00 AAB30.9
6:30 7:00
1.10
14:00 15:00
FGH29.9
IJK
EFFACER :
SORTIE
ACCES SMART
ANNUL/0
:
ACCES SMART -RAPPEL-
:
:
OK
DATE HEURE PROG.
RAPPEL 1 2 3 4
REGLER
SELECTIONNER
SORTIE
PAS DE DONNEES
ACCES SMART