Filter
Top Products
86
Searching using the index function
Searching using the index function
The VCR automatically marks the tape with an index signal at the point where each
recording begins. Use these signals as references to find a specific recording.
To stop searching
Press x STOP.
Notes
• No index signal will be added when recording starts from recording pause.
However, an index signal will be marked if you change the programme position
during recording pause.
• When you press . RECHER INDEX, if there is nothing recorded before the
selected index signal, playback may not start exactly at the index signal.
1
Insert an indexed tape into the VCR.
2
Press ./> RECHER INDEX.
• To search ahead, press > RECHER
INDEX.
• To search backwards, press .
RECHER INDEX.
The VCR starts searching, and playback
starts automatically from that point.
RECHERCHE
INDEX