Filter
Top Products
Chapter 5 Adjusting and Setting Through Menus
Chapter 5 Adjusting and Setting Through Menus 73
AUDIO SET menu
Icon/Menu Submenu Setting
AUDIO SET
AUDIO MODE
(page 27)
AUDIO MONI
(page 27)
AUDIO LOCK
JOG AUDIO
(page 38)
Selects the audio mode.
FS32K : Switches the audio mode to 4-channel mode (12-bit mode).
FS48K : Switches the audio mode to 2-channel mode (16-bit mode). (This setting
records the sound in all audio ranges, providing a high-quality sound
recording.)
Notes
• When signals are input from HDV/DV jack, the audio mode of the signals to be recorded
is the same as that of the input signals.
• Recording performs automatically in [FS48K] mode in HDV format.
• You cannot change the current setting during recording.
• Noise may occur at the instant you switch the audio mode.
• When dubbing a sound source in DVCAM, select [FS32K].
Sets the audio that is output from PHONES jack and HDMI OUT jack.
CH1,CH2 : Outputs CH1 and CH2 audio to each channel.
CH1 : Outputs CH1 audio to CH1/2.
CH2 : Outputs CH2 audio to CH1/2.
Note
When AUDIO OUTPUT SELECT switch is set to CH3/4, [CH1] and [CH2] are correspond to
[CH3] and [CH4], respectively. When it is set to MIX, [CH1] and [CH2] are correspond to
CH1/3 synthesis sound and CH2/4 synthesis sound, respectively.
UNLOCK MODE
: Records the sampling clocks of audio and video independently. This
mode applies to a consumer DV tape.
LOCK MODE : Synchronizes the sampling clocks of the audio and video for recording.
This setting is effective for digital processing and performs a clean splice
during the audio editing process.
Notes
• You can set this menu when recording in DV format (SP mode) only.
• When recording in HDV or DVCAM format, the menu is set to [LOCK MODE].
• During the i.LINK input, the same setting as that of an input signal is selected regardless
of this setting.
Selects either to turn the sound output on or off when the tape is played at a speed other
than normal. (Available in DVCAM/DV format only.)
OFF : Does not output the sound when playing a tape at a speed other than
normal.
ON: Outputs the sound when playing a tape at a speed other than normal.
Notes
• When a tape recorded in HDV format is played back, the sound cannot be output in
various speeds.
• Even if you have set this item to ON, the sound may not be output or may be interrupted
depending on the recording format or tape conditions.
Operating the Menus
Icon/Menu Submenu Setting
DISPLAY
SET
LCD BLACK
Mutes the images on LCD panel and display only the text data.
OFF : Does not mute the images
ON : Mutes the images
Note
When [ON] is selected, the images output from the rear panel to the external monitor does
not mute.