Filter
Top Products
Chapter 5 Adjusting and Setting Through Menus
74 Chapter 5 Adjusting and Setting Through Menus
VTR SET menu
Icon/Menu Submenu Setting
VTR SET
DUPLICATE
PLUS
(page 56)
CUSTOM
REPEAT
(page 39)
AUTO INDEX
(page 47)
STILL PICT
FF/REW
SPEED
(page 15)
Selects the video format and whether to use auto rewind or not while duplication.
FORMAT SEL
ALL : Duplicates all video formats.
HDV1080i : Duplicates HDV1080i format only.
DVCAM : Duplicates DVCAM format only.
DV SP : Duplicates DV (SP) format only.
AUTO REW
ON : Rewinds the tape on both the player and the recorder, and starts
duplication. Also, when you continue to duplicate a resource tape from
multiple tapes, the new work tape will be rewound automatically and start
duplication.
OFF : Starts duplicating from the current portion of the tape.
Note
You cannot use these settings during duplication.
Adjusts the REPEAT TIMES, REPEAT CYCLE, and START TIME of the CUSTOM
REPEAT.
REPEAT TIMES
ON/OFF : Selects whether to apply REPEAT TIMES setting or not.
TIMES : Sets the number of times to repeat playbacks.
Set the number by pressing J/j buttons on the unit.
REPEAT CYCLE
ON/OFF : Selects whether to apply REPEAT CYCLE setting or not.
CYCLE : Sets the time of intervals for playback.
Set the number by pressing J/j buttons on the unit.
START TIME
ON/OFF : Selects whether to apply START TIME setting or not.
TIME : Sets the starting time of CUSTOM REPEAT.
Set the number of each hour and minute by pressing J/j buttons on the unit.
Press K/k buttons to switch between hour and minute. Press EXEC button to execute.
Selects whether or not to mark an index signal automatically when the unit in the stop mode
starts recording.
ON : Marks an index signal at the beginning of the recording.
OFF: Does not mark an index signal at the beginning of the recording.
Selects the image displayed in the still mode (DVCAM/DV (SP) format only).
AUTO : Displays an optimized image according to the movement in the image.
FRAME: Displays a frame image.
FIELD: Displays a field image.
Notes
• If you select [FIELD], the image of field 2 is displayed.
• When a tape has been recorded in HDV format, a field image is always displayed.
Selects the tape transport mode in fast-forward and rewind.
FF/REW : Fast-forwards or rewinds the tape at maximum speed without displaying
the picture.
SHUTTLEMAX
: Fast-forwards or rewinds the tape at maximum speed while displaying
the picture.
DVCAM
NTSC:Approx. 14 times of normal speed
PAL: Approx. 17 times of normal speed
HDV/DV(SP)
Approx. 24 times of normal speed
Operating the Menus