Filter
Top Products
ICD-SX57 GB 2-894-353-52 (1)
78
GB
Using a USB AC
Adaptor (not
supplied)
To USB connector
USB cable (supplied)
You can charge the rechargeable
batteries (not supplied) by connecting
the IC recorder to an AC outlet using a
USB AC adaptor (not supplied).
You can charge the batteries while you
are using the IC recorder, so that it is
useful when you want to record for a
long time.
1 Connect the USB cable supplied
to the USB connector of the IC
recorder.
2 Connect a USB AC adaptor (not
supplied) to the USB cable.
3 Connect the USB AC adaptor to an
AC outlet.
While the batteries are charging,
“CONNECTING” and the battery
indicator are displayed in an
animation.
When the battery indicator indicates
“ ,” charging is completed. (Charging
time: approx. 4 hours*)
When you use the IC recorder for the
rst time, or after you have not used
the IC recorder for a certain time, it
is recommended that you charge
the batteries repeatedly until “ ” is
displayed.
If the battery indicator is not displayed,
charging has not been done properly.
Proceed from step 1 again.