Filter
Top Products
11
Setting a component code
by the Search function
You can find a code number
available for a component that
doesn’t have one in the supplied
“Component Code Numbers”.
Before starting the Search
function
Set each component to the
following status so that the Search
function works effectively.
TV: Power-on
VCR, SAT, CBL, DVD, AMP:
Power-off
VD, CD, MD, TAPE: Power-on
with a playback source (disc,
cassette tape, etc.)
1 Press S (set).
All Component Select buttons
flash.
2 Press the Component Select
button for the desired
component.
The selected Component
button lights up, and all other
buttons turn off.
3 Press CH + or CH – and
POWER in turn until the
component reacts as
decribed in the following.
Powers off: TV
Powers on: VCR, SAT, CBL,
DVD, AMP
Plays back: VD, CD, MD, TAPE
Press CH + to go to the next
code number.
Press CH – to go back to the
previous code number.
The Component button flashes
three times after the numbers
have turned one cycle.
Note
Always be sure to first press CH+/-
before pressing POWER. Otherwise
the Search function does not work
properly.
Continued