Filter
Top Products
35
Programming a
Frequently Used Key
Operation for
SYSTEM CONTROL
Buttons
In addition to their original
System Control functions (see
page 23), SYSTEM CONTROL 1, 2
or 3 buttons can be programmed
to “learn” any remote control
signal.
As they operate independently
from other buttons, SYSTEM
CONTROL 1, 2 or 3 buttons can
work as one-touch buttons
without any preceding operation
such as pressing a Component
Select button to select a
component.
This is useful if you prefer having
the SYSTEM CONTROL button as
a “one-touch” button for a single
operation rather than executing a
series of commands.
Note
Some specific remote control signals
may not be learned.
Continued
RM-VL900
about 2 – 4 inches
(5 – 10 cm) away
Example: To store the On/Off
signal of an air-conditioner to
the SYSTEM CONTROL 2 button
1 Place the Commander head
to head with the remote
control of the air-
conditioner.
2 Press and hold S (set) for
more than 3 seconds.
The S (set) indicator lights up,
and all Component Select
buttons flash.
Remote control of
your air-conditioner