Filter
Top Products
43
Selecting a Channel
with a Single Button
— Channel Macro Function
You can program the Channel
Macro function on the buttons
listed below (macro keys).
If you program the operation of
entering 1, 2 and 3 on a macro key
button, you can select the channel
123 by pressing that single button.
Component Macro key
TV, CBL, SAT**: m, N, M,
REC z*, x, X
* You can program this function on
the single REC z button (not on the
REC z + B button for a double-
pressing operation).
** You cannot program this function on
the REC z button for SAT.
Continued
Example: To assign TV channel
123 to the REW button
1 Press and hold S (set) for
more than 3 seconds.
The S (set) indicator lights up,
and all Component Select
buttons flash.
2 While holding REC z
pressed, press the desired
Component Select button.
The S (set) indicator and the
selected Component button
flash.