Filter
Top Products
14
Notes on operating your
components
When you use a double cassette
deck
1 If the remote control for your
deck has a Deck A/B select
control, the RECALL button on
your Commander has the
corresponding function.
2 If you cannot select Deck A/B
with the RECALL button, first
set the number code for either
one of the decks, and
•set the function controls for
the other deck to other free
buttons (for example, the
Number buttons) using the
Learning function (page 15),
or
•assign the other deck to
another Component Select
button (page 32).
About the input select of a TV
Each time the TV/VIDEO button
is pressed, the input is changed in
order. It is also possible to select
directly as follows when you are
connecting more than two VCRs.
“TV/VIDEO” + “0” : TV tuner
“TV/VIDEO” + “1” : VIDEO1
“TV/VIDEO” + “2” : VIDEO2
“TV/VIDEO” + “3” : VIDEO3
“TV/VIDEO” + “4” : VIDEO4
“TV/VIDEO” + “5” : VIDEO5
“TV/VIDEO” + “6” : VIDEO6
If the above operations do not
work, program the remote control
signals of your component to the
Commander using the Learning
function (page 15).
About the input select of a VCR
Each time the TV/VIDEO button
is pressed, the input is changed in
order. It is also possible to select
directly as follows.
“TV/VIDEO” + “0” : Tuner
“TV/VIDEO” + “1” : LINE1
“TV/VIDEO” + “2” : LINE2
“TV/VIDEO” + “3” : LINE3
“TV/VIDEO” + “4” : LINE4
“TV/VIDEO” + “5” : DV in
When you use a Sony VCR, the
above commands are preset. For
other brands, it is possible to
“teach” the above sequential
button operations using the
Learning function (see page 15).
Operating Your Components
with the Remote Commander
(continued)