Filter
Top Products
Satelfite Receiver
and Cable/Antenna
[] SAT signals are selected by tile SAT Box connected to tile VIDEO
INPUT. TV signals are selected from the signal connected to the
CABLE input.
Disconnect all power sources before making any connections.
t Connect tile satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
2 Use A/V and S VIDEO cables to connect the satellite receiver's AUDIO
and S VIDEO OUT jacks to the TV's AUDIO and S VIDEO IN jacks.
3 Use a coaxial cable to connect your cable to the TV's CABLE jack, or
your antenna to the TV's VHF/UHF jacks.
_ If your satellite receiver is not equipped with S VIDEO, use a VIDEO
cable (yellow) instead of the S VIDEO cable.
Coaxial cable
Rear of TV f--
CABLE
S VIDEO_
Satellite receiver
_i._ VIDEO
AUDIO-L
AUDIO-R
S VIDEO cable
26