Sony KDF-50E2000 Flat Panel Television User Manual


 
Accessing the Sound Settings
1.Press MENU ..................
2. Select Settings ...............
3. Higbligbt ........................
(ih
4.Press to select ................ _>j
To highlight an option aud to change settings, press tl. 4!,I. *.
Press @ to confirm the selection.
To exit the Sound, press _.
Selecting Sound
Options
"_°Sound Mode settings
are independent of
settings in the
Treble/Bass options.
"_°TruSurround XT
attempts to create the
same surround effect
produced by a
multichannel system
using the left and right
speakers.
Tile Sound settings include tile following options:
Sound Dynamic Select to enhance treble and bass.
Mode Standard Suitable for spoken dialog.
Custom Flat setting.
Reset Reset the following options to the default setting: Treble, Bass,
Balance, Steady Sound, Volume Offset and BBE.
Treble Adjust to increase or decrease higher-pitched sounds.
Bass Adjust to increase or decrease lower-pitched sounds.
Balance Adjust to emphasize left or right speaker balance.
Steady On Select to stabilize the volmne across all programs
Sound and commercials.
Off Select to turn off Steady Sound.
Volume Adjust to increase or decrease the sound level of the current iuput
Offset (TV or video inpnt) relative to other inputs.
Surround TruSurround Select for surround sound (for stereo programs
XT only).
Off Normal stereo or mouo reception.
BBE Select to give sound more impact by compensatiug for phase effects
iu speakers. Select from High, Low, and Off.
Sound Mode option is set to Dynamic or Standard. To
use BBE, set Sound Mode to Custom.
62