Sony KDF-50E2000 Flat Panel Television User Manual


 
Sound
Good picture, no sound 7j Press MUTING so that Muting disappears from the screen (see page 40).
7j Make sure the Speaker option is set to On ill the Sound setting (see page 63).
7j Make sure the MTS option is set to Stereo or Mono (see page 63).
73 When the HDMI IN input is in use, surround sound, such as AC-3 and DTS,
cannot be input. Change the sound setting for the external input device to Linear
PCM.
Audio noise 7j Make sure that the antenna is connected with 75-ohm coaxial cable.
7j Keep the antenna cable away from other connecting cords.
73 To avoid TV interference, make sure to use an undamaged antenna cable.
Cannot gain enough volume 7j Increase the volume of the cable box using the cable box's remote control. Then
when using a cable box press TV(FUNCTION) once (the TV indicator lights up) and adjust the TV's
volume.
Sound seems weak or 7j The TV's audio might be set to Auto SAP or Mono, when it might be better set to
insufficient Stereo. In the Sound setting (see page 63), set the MTS setting to Stereo. If
already set to Stereo, switch to Mor/o (which may reduce background noise
during weak stereo broadcasts).
Cannot raise the volume on [3 If the Speakeroption is set to Off and the Audio Out option is set to Fixed (in
external speakers order to output the sound to your audio system), use your audio receiver to adjust
the sound (see page 63). Or, to use the TV remote control, set the Audio Out
option to Variable.
7j To turn on the TV speakers, set the Speaker option to On (see page 63).
No audio for HDMI [21 Confirm DVD player, set-top-box audio settings. Select 2 channel LPCM audio.
Channels
Cannot receive upper channels 7j Press ANT to select the VHF/UHF input (see page 39).
(UHF) when using an antenna 7j Use Auto Program in the Channel setting to add receivable channels that are not
presently in the TV's memory (see page 66).
Cannot receive any channels 7j Use Auto Program in the Channel setting to add receivable channels that are not
when using cable TV presently in the TV's memory (see page 66).
[3 Press ANT to select the CABLE input (see page 39).
Cannot receive or select 7j Use Auto Program in the Channel setting to add receivable channels that are not
channels presently in TV memory (see page 66).
Some digital cable channels are 7j Certain cable companies have limitations on the broadcast of digital cable
not being displayed channels. Check with your cable company for more information.
7j The digital cable channel may be set to Hidden in the Channel setting (see page
66).
82