16
The Sound Adjustment Menu
The “Sound Adjustment” menu allows you to alter the sound
adjustments.
To do this:
Once you have entered into this menu, press
v or V to select
the desired option, then press
b. Next press v/V/B or b
repeatedly to adjust it and finally press OK to store the new
adjustment.
Effect This option allows you to customise the sound mode. After selecting this option press b.
Next press
v or V repeatedly to select:
Natural (Enhances clarity, detail and presence of sound by using “BBE High
Definition Sound system”*).
Dynamic (“BBE High Definition Sound system”* intensifies clarity and presence of
sound for better intelligibility and musical realism).
Dolby**V (Dolby Virtual, simulates the sound effect of “Dolby Surround Pro Logic”).
Off (Flat response).
Treble Press
B or b to decrease higher-frequency sounds.
Bass Press
B or b to decrease or to increase the lower-frequency sounds.
Balance Press
B or b to emphasise the left or the right speaker.
Reset Press OK to reset the sound to the factory preset levels.
Dual Sound • For a Stereo broadcast:
Press
v or V to select Stereo or Mono.
• For a bilingual broadcast:
Press
v or V to select Mono (for mono channel if available), A (for channel 1) or B (for
channel 2).
Auto Volume Press
v or V to select On (the volume level of the channels will stay the same,
independent of the broadcast signal, e.g. in the case of advertisements) or Off (the volume
level changes according to the broadcast signal).
TV Speakers Press
v or V to select On (to listen to the TV from the set speakers) or Off (to listen to the
TV from an external amplifier connected to the audio outputs on the rear of the projection
TV.
• If you are listening to the TV through headphones, the “Effect” option will automatically be switched
to “Off”.
• If you select “Dolby Virtual” on the “Effect” option, the “Auto Volume” option will automatically be
switched to “Off” and vice versa.
* The “BBE High Definition Sound system” is manufactured by Sony Corporation under license from
BBE Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866. The word “BBE” and
BBE Symbol are trademarks of BBE Sound, Inc.
** This TV has been designed to create the “Dolby Surround” sound effect by simulating the sound of
four speakers with two speakers, when the broadcast audio signal is Dolby Surround encoded. The
sound effect can also be improved by connecting a suitable external amplifier (for details refer to
“Connecting to external audio Equipment” on page 33).
** Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D
symbol are trademarks of Dolby Laboratories.
The General TV Menus
Sound Adjustment
Select: Enter Menu:
Effect
Treble
Bass
Balance
Reset
Dual Sound
Auto Volume
TV Speakers
Natural
Off
Stereo
On
Sound Adjustment
Select: Enter:
Effect
Treble
Bass
Balance
Reset
Dual Sound
Auto Volume
TV Speakers
Natural
Off
Stereo
On
,
m
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
MENU