Filter
Top Products
27
GB
PIN CODE
This option allows you to set a 4-digit PIN code.
To do this:
1 Once you have entered into the “Detail Set-up” menu as it is explained in the previous page, press the V
or
v button to highlight “PIN Code” then press the OK button to display the “PIN Code” menu.
2 Enter your PIN code using the numbered buttons on the remote control. If you enter a wrong number,
press the RED button to clear and start again.
3 Once you have entered a 4-digit code a cursor will appear in the second PIN Code box. Enter your new
PIN code once again as confirmation.
4 When both PIN codes match, a message appears to inform you that your new PIN code has been
accepted. This is the PIN code you must use in future.
5 Press the BLUE button to return to the “Digital Set-up” menu or press the MENU button to exit from this
menu.
SOFTWARE DOWNLOAD
Periodically Sony issues updates for the software that controls your TV. This option allows you to
automatically receive updates free through your existing aerial.
To do this:
1 Once you have entered into the “Detail Set-up” menu as it is explained in the previous page, press the V
or
v button to highlight ”Software Download” then press the OK button to display the “Software
Download” menu.
2 Press the V or v button to change the “Current Setting”. If you wish to receive downloads, the “Current
Setting” should be set to “ON”. If you do not wish to receive downloads, the “Current Setting” should
be set to “OFF”.
3 Press the OK button to confirm your selection.
4 Press the BLUE button to return to the “Digital Set-up” menu or press the MENU button to exit from this
menu.
SYSTEM INFORMATION
This is an information screen only. It tells you the current version of the software in your TV together with
the signal strength, as indicated by the coloured bar in the display.
To do this:
1 Once you have entered into the “Detail Set-up” menu as it is explained in the previous page, press the V
or
v button to highlight “System Information” then press the OK button to display the “System
Information” menu.
2 Press the BLUE button to return to the “Digital Set-up” menu or press the MENU button to exit from
this menu.
The Digital Menus