Sony KP-44DX2 Projection Television User Manual


 
24
PARENTAL CONTROL
In order to use the “Parental Control” feature you must first set your PIN code.
This option allows you to set an age limit for programmes on the TV. If any films or programmes classed
above the age limit you have set are broadcast, you will be requested to enter your PIN code before viewing
is allowed.
To do this:
a) If you have not already set a PIN code:
1 Once you have entered into the “Main Menu” as it is explained in the previous page, press the V or v
button to highlight “Parental Control” then press the OK button to display the “Parental Control”
menu.
2 Press the RED button to display the PIN entry box on screen.
3 Using the numbered buttons on the remote control, enter a 4-digit number of your choice. As you
enter each digit it will be represented by a * in the PIN entry box. Enter the code again to confirm.
This will be your PIN number for the future - please use a number you can easily remember.
4 Press the OK button to confirm your PIN code.
5 Press the BLUE button twice to return to the “Main menu”.
6 Finally follow steps 2-4 of the instructions below.
b) If you have already set a PIN code:
1 Once you have entered into the “Main Menu” as it is explained in the previous page, press the V or v
button to highlight “Parental Control” then press the OK button to display the “Parental Control”
menu.
2 Using the numbered buttons on the remote control, enter your 4-digit PIN code. As you enter each
digit it will be represented by a * in the PIN entry box.
If you have forgotten your PIN code, please use 9999. This PIN code will always be accepted.
3 With the “Age” box highlighted, press the V or v button to set the age limit you desire then press the
OK button to confirm your setting.
4 Press the BLUE button to return to the “Main Menu” or press the MENU button to exit from this
menu.
AUTO TUNING
This option allows you to automatically re-tune all available Digital channels.
To do this:
1 Once you have entered into the “Main Menu” as it is explained in the previous page, press V or v
button to highlight “Auto Tuning” then press the OK button to display the “Auto Tuning” menu.
2 Next, press the RED button to begin tuning in all available Digital channels.
If you wish to cancel the “Auto Tuning” process, press the BLUE button.
Press the BLUE button to return to the “Main Menu” or press the MENU button to exit from
the menu.
The Digital Menus