Filter
Top Products
17
GB
The Features Menu
The “Features” menu allows you to alter various adjustments
of the TV.
To do this:
Once you have entered into this menu, press
v or V to select
the desired option. Next read below how to operate into each
option.
SLEEP TIMER
This option allows you to select a time period for the TV to switch itself automatically into the standby mode.
To do this:
After selecting the option press
b, then press v or Vto set the time period delay (max. of 4 hours).
• While watching the TV, you can press the button on the remote control to display the time
remaining.
• One minute before the projection TV switches itself into standby mode, the time remaining is
displayed on the TV screen automatically.
AUTO FORMAT
This option allows you to automatically change the aspect ratio of the screen.
To do this:
After selecting the option, press
b. Then press v or V to select On (if you wish the TV set to automatically
switch the screen format according to the broadcast signal) or Off (if you wish to keep your preference).
Finally press OK to store.
Even if you have selected “On” or “Off” in the “Auto Format” option, you can always modify the format
of the screen by pressing repeatedly on the remote control to select one of the following formats:
Smart: Imitation of wide screen effect for 4:3 broadcast.
4:3: Conventional 4:3 picture size, full picture information.
14:9: Compromise between 4:3 and 16:9 picture size.
Zoom: Widescreen format for letterbox movies.
Wide: For 16:9 broadcast. Full picture information.
In “Smart”, “Zoom” and “14:9” modes, parts of the top and bottom of the screen are cut off. Press
v or
V to adjust the position of the image on the screen (e.g. to read subtitles).
4:3
Zoom
14:9
Wide
Smart
continued...
The General TV Menus
Features
Sleep Timer
Auto Format
AV2 Output
PIP Input
PIP Position
Select: Enter Menu:
Off
On
AUTO
AV1
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
,
m
Features
Sleep Timer
Auto Format
AV2 Output
PIP Input
PIP Position
Select: Enter:
Off
On
AUTO
AV1
MENU