Filter
Top Products
Installing and Connecting the Projection TV
16
Model name1[KP-51WS500] Model name2[KP-57WS500] Model name3[KP-65WS500]
[4-088-847-11 (1)]
Basic Connections (Connecting Cable TV or Antenna)
Connecting Directly
to Cable or an
Antenna
The connection you choose depends on the cable found in your home. Newer
homes are equipped with standard coaxial cable (see A); older homes
probably have 300-ohm twin lead cable (see B); other homes may contain
both (see C).
A VHF Only or VHF/UHF or Cable
B VHF Only or UHF Only or VHF/UHF
C VHF and UHF
Cable and Antenna If your cable provider does not feature local channels, you may find this
setup convenient.
Select CABLE or antenna (ANT) mode by pressing
ANT on the remote
control.
75-ohm coaxial
cable
Rear of projection TV
VHF/UHF
Rear of projection TV
Antenna connector
300-ohm twin lead cable
VHF/UHF
Rear of projection TV
75-ohm coaxial cable
VHF/UHF
U/V Splitter
(not supplied)
300-ohm twin lead cable
✍ To receive channels with an antenna, you need to turn your Cable to OFF
(see page 53) and perform the Auto Program function (see page 54).
CATV cable
Rear of projection TV
TO
CONVERTER
(No connection to
TO CONVERTER)
VHF/UHF
Antenna cable
AUX
01COV.book Page 16 Tuesday, April 2, 2002 12:22 PM