Filter
Top Products
10
Using Your New TV
4
If the upper and lower
bars are slanted, move
left or right so that they
become horizontal, then
press
.
“Picture V-Position” menu
appears.
5
If the upper and lower
bars are not equally
positioned to the top and
bottom of the screen,
move
up or down to
adjust them, then press
.
“Display this menu next
time?” appears.
6
Move up or down to select “No”, then press .
The “Initial Setup” menu will not appear again the next time you turn on
the TV by pressing !.
To allow this menu to appear again, select “Yes”, then press
.
Tips
• You can immediately go to the end of the “Initial Setup” menu by pressing
MENU.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 88).
Notes
• Before adjusting “Picture Rotation” and “Picture V-Position”, keep
external speakers or other electrical equipment away from the TV. The
magnetic disturbance from these equipment or the direction of the earth’s
magnetic field may affect the TV.
• If you do not succeed in adjusting “Picture Rotation” and “Picture V-
Position”, turn off the TV and change its location or direction, then try to
adjust using the menu. Do not move the TV while the TV is turned on. If
you do, abnormal color patches may appear on the picture. Press ! on
the TV to turn off the TV for about 15 minutes, then turn it on again to
demagnetize the TV.
• When adjusting “Picture Rotation”, adjust the value step by step. If you
rotate the bars largely at a time, color distortion may occur.
• You cannot adjust “Picture Rotation” and “Picture V-Position” when HD
signals are input or “Memory Stick” mode is selected.
T
W
I
N
P
R
O
G
+
T
W
I
N
P
R
O
G
–
T
W
I
N
P
R
O
G
+
T
W
I
N
P
R
O
G
–
E n d :S e l e c t : C o n f i r m :
D i s p l a y t h i s m e n u n e x t t i m e ?
Y e s
N o
I n i t i a l S e t u p
Getting Started (continued)
T
W
I
N
P
R
O
G
+
T
W
I
N
P
R
O
G
–
T
W
I
N
P
R
O
G
+
T
W
I
N
P
R
O
G
–
Select : C o n f i r m : E n d :
P i c t u r e V - P o s i t i o n