Filter
Top Products
35
Advanced Operations
When receiving an A2 (German) program
Broadcasting On-screen display (Selected sound)
A2 (German) stereo
A2 (German) bilingual
Receiving area for NICAM and A2 (German) programs
System Receiving area
NICAM Hong Kong, Singapore, New Zealand, Malaysia,
Thailand, etc.
A2 (German) Australia, Malaysia, Thailand, etc.
Notes
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM program, select
“Mono”. The sound becomes monaural, but the noise is reduced.
• Before receiving a NICAM stereo program in China, please check the
NICAM broadcast condition at your area. When receiving a NICAM
stereo program, the receiving conditions might vary depending on area. In
addition, different strength of the NICAM broadcast signal might affect
the receiving quality.
If the sound is distorted or noisy when receiving a monaural
program through the 8 (antenna) terminal
Press A/B repeatedly until “Mono” appears on the screen.
To cancel the monaural sound setting, press A/B again until “Auto”
appears on the screen.
Notes
• The “Mono” or “Auto” setting is memorized for each program position.
•You cannot receive a stereo broadcast signal when the TV is in the “Mono”
setting. Normally, set the TV to “Auto”.
Stereo
Mono
(Stereo sound)
(Regular sound)
Main
Sub
(Main sound)
(Sub sound)
Mono
Auto