Filter
Top Products
Setup and Cable Connections
16
Watching video with a connected
video devices
Open the [Index] window, select [Video 1] or
[Video 2] according to the input terminal to
which the video devices is connected.
z Tip
To operate video devices from the LocationFree
®
client devices, you must connect the supplied IR
Blaster. For details, see the right part of the page.
Note
If you connect a DVD player to the Base Station via a
VCR, the VCR’s copy guard function may distort or
dim the DVD picture. Connect the DVD player
directly to the video input terminal on the Base Station.
Attach the supplied IR Blaster to the video
devices connected to the Base Station.
You can control the video devices with the
LocationFree
®
client devices on-screen remote
control via the IR Blaster.
With reference to the operating instructions of the
video devices, make sure to place the IR Blaster
just above or below the remote sensor. Remote
sensors on Sony Recorders and other products are
identified by the symbol.
Note
Do not remove the backing paper from the IR Blaster
yet.
After configuring LocationFree
®
Player remote
control settings (1 LocationFree
®
Player’s Help),
remove the backing paper from the IR Blaster and fix
it in place.
Connecting the IR Blaster
IR
BLASTER
LAN
1
2
VIDEO 1
VIDEO 1
WLAN
AP
CLIENT
ININ
OUT
VIDEO
AUDI O
L
R
Y
P
B
P
R
Y
P
B
P
R
VIDEO
AUDI O
L
R
VIDEO
AUDI O
L
R
VIDEO
AUDI O
L
R
DC IN 12V
OUT
VIDEO 2
(VIDEO/COMPONENT)
VIDEO 2
(VIDEO/COMPONENT)
S VIDEOS VIDEO
IR Blaster
(supplied)
Infrared transmitter
Remote sensor
to IR BLASTER port
You can connect the
IR Blaster to either
port.
Base Station rear panel