Filter
Top Products
Others
36
Base Station Settings
Problem Causes and remedies
Cannot open the [Base Station Settings]
screen.
• [Base Station Settings] cannot be clicked when the Base Station and
computer are not on the same LAN.
• If a global IP address is assigned to your device, you cannot open the
[Base Station Settings] page with the device at the time of purchase.
Assign a private IP address, such as 192.168.1.xx, to your device, and
then click [Base Station Settings].
• When connecting the Base Station to a network that requires a proxy,
click [LAN Settings] under [Local Area Network (LAN) settings] on
the [Connections] tab of [Internet Options] in Internet Explorer, then
click [Advanced] and set the IP address of the Base Station as an
address that does not use a proxy.
• If you set the wrong IP address to your Base Station connecting with a
wired LAN, you cannot connect to the Base Station any more. In this
case, change the settings by connecting to the Base Station directly with
wireless or, initialize the Base Station (1 page 34).
Authentication of the user name and
password for opening the setup screen
fails.
• Did you enter the correct user name? The user name is lfx (lowercase
letters).
• Did you enter the correct password? The default LoginPassword is
printed on the label on the side of the Base Station and on the sticker on
the back cover of the “Quick Start Guide.”
• Did you enter uppercase letters instead of lowercase letters, or vice
versa? The Base Station distinguishes between uppercase and
lowercase letters.
Forgot the password for opening the
setup screen.
• The default password is printed on the label on the side of the Base
Station and on the sticker on the back cover of the “Quick Start Guide.”
• If you changed the password and forgot the new password, the Base
Station will need to be initialized (1 page 34). After initializing the
Base Station, enter the password printed on the label on the side of the
Base Station.
Cannot open the [Base Station Settings]
page right after setting.
Click [Base Station Settings] of LocationFree
®
Player again to open the
[Base Station Settings] page.
Cannot delete the registered information
of a PC which is assigned the same
serial key as another device from the
Base Station.
Check 2 of “Device Registration” (1 page 26), and delete the registered
information of the PC assigned the same serial key.