Filter
Top Products
Base Station Settings
26
2
Set [Manual] for [DNS Configuration] and
enter the following information.
DNS1: 192.168.0.1
*3
DNS2: It is ok to leave the field blank.
*3
Example when the IP address of the router
is 192.168.0.1. If the IP address of the
router is 192.168.1.1, enter 192.168.1.1
for the DNS1.
3
Click [Set].
4
Set port forwarding on the router.
Enter the Port Number that you set while
making NetAV Settings.
For details, refer to the operating
instructions for your router.
You can check the list of registered devices and
delete unnecessary devices from the list. Also, you
can disable device registration via the Internet, and
can change the registration password which is
required for registration via the Internet.
1 A list of the devices currently registered with
the Base Station appears here. The client
nickname will be displayed differently
depending upon the specifications of each
registered device. When you want to update
the list, click [Update].
2 If you want to halt connection to the Base
Station from a registered device, check the
device in the “List of Registered Devices” list
and click the [Delete] button.
3 The [Device Registration via the Internet]
option is set to [Enable] at the time of
purchase. If you set it to [Disable], the Base
Station does not accept any device registration
via the Internet.
4 You can change the registration password. If
you want to change the registration password,
enter a string of up to 8 alphanumeric and
characters.
5 Click this to save changes.
6 You can download the information required
for the device registration via the Internet
(Domain Name, Port Number, and
Registration Password) on an encrypted file
by clicking this button.
Notes
• Some web browsers do not support the
downloading of the file for registration.
• To register PSP
®
via the Internet, downloading
the registration information is required.
Download the file for registration to a folder
(1 the following) in the Memory Stick Duo
™
.
Memory Stick (E:) /MSSONY/LF/REGISTER
(The drive name depends on the computer.)
• PSP
®
system software version 2.80 or later is
required for registration.
z Tip
To check whether device registration is complete, click
[Update] under [List of Registered Devices].
The [Internet Connection] frame allows you to set
an IP address for your Base Station, according to
your network environment. You can also check the
Base Station’s MAC addresses.
To determine the address to set, contact your
contracted ISP to the operating instructions of
your modem or router.
Note
If you change the IP address or select [Automatic IP
Address Configuration (DHCP)] in the [Internet
Connection] frame and then click [Set], you will no
longer be able to access the [Base Station Settings]
screen because the IP address is changed. To open the
[Base Station Settings] screen, click on the
LocationFree
®
Player’s Base Station list, and then click
[Base Station Settings].
Device Registration
1
4
3
6
2
5
Internet Connection