Filter
Top Products
7
What is the LocationFree
®
Base Station?
Identifying Parts and Controls
1POWER button/LED (1 page 12)
Turns the Base Station power on and off.
Green: The power is on.
Red: Attempting to be turned off.
Red blinking: A malfunction has occurred.
Off: The power is off.
2WIRELESS LED
Indicates the wireless function status.
Amber: Wireless network is available on the 5 GHz channel
(Access Point (AP) mode).
Green: Wireless network is available on the 2.4 GHz channel.
Green blinking: Attempting to connect (Client mode).
3NETWORK LED
Indicates the connection status to a network.
Green blinking: Attempting to connect.
Green: Connected to the network. The LED blinks quickly when
data is streamed.
Off: Not connected (Access Point mode).
4NET AV LED
Indicates the connection status with the LocationFree
®
client
devices.
Green: Connected to the Base Station.
Amber: Automatic NetAV check has failed.
Off: Not connected.
Red: The Base Station is being initialized.
5SETUP MODE button and LED (1 page 19)
Press to register LocationFree
®
client devices.
Indicates the SETUP MODE status.
Amber blinking: The Base Station is in the Setup mode.
6RESET button (1 page 34)
Initializes all settings on the Base Station to the factory defaults.
7Remote sensor for learning and searching remote features
(1 page 20)
When using the learning or searching remote features or setting the
on-screen remote control, this sensor receives signals from the
remote of video devices.
Front
WIRELESS
NETWORK
SETUP
MODE
NET AV
RESET