Filter
Top Products
Registering LocationFree
®
Client Devices on the Base Station
19
When you register a device near the Base Station,
you need to use the SETUP MODE button on the
Base Station.
1
Press the SETUP MODE button on the front
of the Base Station.
The SETUP MODE LED starts blinking
amber.
Note
If you are using the LF-V30 in Access Point
mode, the Base Station works on the 2.4 GHz
frequency band and the settings on the sticker on
the Base Station.
2
Register your device to the Base Station by
following the Operating Instructions of the
device.
When you are registering a computer
installed with the LocationFree
®
Player
LFA-PC30, follow the setup wizard.
When you are registering a device other than
a computer, refer to the Operating
Instructions of the device.
When you register a device via the Internet, you
do not need to use the SETUP MODE button on
the Base Station.
Check the required information for registering a
device via the Internet. You can find the
information on the sticker on the back cover of
the “Quick Start Guide”, or in the [Base Station
Settings] page (1 page 24).
Note
Please follow the instructions of the “Quick Start
Guide” with care, which is necessary for registering
your device(s) with the Base Station.
Disclosing such information to strangers may result in
allowing them to register their device(s) without your
permission.
In case you lost the “Quick Start Guide,” please select
to disable Device Registration in the Base Station
settings page and change your registration password
(1 page 31).
If someone has registered his/her device with the Base
Station without your permission, please delete the
device from the list of registered devices on the Base
Station settings page (1 page 26).
1
Check the information required for the
registration.
Checking the information on the
sticker attached to the “Quick Start
Guide”
You can find a Domain Name, a Port
Number and a Registration Password on the
sticker on the back cover of the “Quick Start
Guide.”
Checking the information in the
[Base Station Settings] page
You can find a Domain Name, a Port
Number and a Registration Password in
[Details needed for Device Registration via
the Internet] in the [Setting Status] screen
(1 page 24).
2
Register the device by entering the
information you obtained.
When you are registering a computer
installed with the LocationFree
®
Player
LFA-PC30, refer to the LocationFree
®
Player’s Help for detailed instructions.
When you are registering a device other than
a computer, refer to the Operating
Instructions of the device.
z Tip
If you want to register a PSP
®
via the Internet, you
need to download a file for device registration on the
[Device Registration] screen of the [Base Station
Settings] page (1 page 26).
Registering a device by using
the SETUP MODE button
Registering a device via the
Internet