Filter
Top Products
Using the Menus
123
Using the Menus
SXRD
2-584-141-12(1)
Label Video
Inputs
Allows you to label the audio/video equipment you have
connected to the SXRD projection TV so you can identify them
when using TV/VIDEO. When in this menu:
1 Press V or v to highlight an input to label, then press
to select it.
2 Use the arrow buttons to scroll through the labels.
3 Press to select the equipment you connected to
each of the input jacks on the back of your SXRD
projection TV.
Select Skip if you do not have any equipment
connected to a particular input.
Video 1-3 VHS, DVD, Receiver, Satellite, Cable Box,
8mm, DTV, Game, LD, Beta, Skip
Video 4-7 DVD, Satellite, Cable Box, DTV, HD, Game,
PVR, Skip
✍ If you select Skip, your SXRD projection TV skips the
selected connection when you press TV/VIDEO.
Language Select to display all on-screen menus in your language of
choice: English, Español, Français.
i.LINK Standby On Allows the i.LINK signal to pass through to
connected i.LINK devices even when the TV
is turned off. The front panel i.LINK Standby
LED shows red. The TV uses more standby
power than when this option is set to Off.
Off Does not allow the i.LINK signal to pass
through to connected i.LINK devices when the
TV is turned off. The TV uses less standby
power than when this option is set to On.
Menu Color Enables you to select a specific color for the on-screen menus
from Gray, Red, Green, Indigo, and Purple.
High Altitude On Select to use the SXRD projection TV at an
altitude of 5,000 feet (1,500 m) or higher.
Off Select to use the SXRD projection TV at
normal altitude.
Illuminated Allows you to illuminate the Sony logo on the front panel of the
TV.
Ye s Illuminates the Sony logo while the power is
turned on.
No Illuminates the Sony logo when you switch the
power on or off.
Option Description
If a CableCARD is
inserted, the i.LINK
Standby Off setting uses
the same amount of power
as the i.LINK Standby On
setting.
z
(Continued)