Filter
Top Products
69
Using the Features
SXRD
2-584-141-12(1)
Using the Features
Overview
This chapter describes how to use the features of your TV.
Watching TV
Topic Page
Watching TV 69
Using the Program Guide 70
Using Wide Screen Mode 72
Using Twin View 74
Using Favorite Channels 77
Using the Freeze Function 79
To Do This ... Do This ...
Activate the remote control to
operate the TV
Press FUNCTION repeatedly until the TV
indicator lights up.
Turn on/off the TV Press POWER.
Tune directly to a channel To tune to analog channels, press 0-9 and then
ENTER.
For digital subchannels, press 0-9,,
press 0-9 again, and then ENTER.
For example, to select subchannel 21.13, press
2+1+ +1+3, and then press ENTER.
You can also select channels using the
program guide. See page 70 for details.
Adjust the volume Press VOL +/–.
Mute the sound Press MUTING (press again or VOL + to
restore the sound).
Alternate back and forth between
two channels
Press JUMP.
The SXRD projection TV alternates between
the current channel and the last channel that
was selected.
Display the current channel
number (and other information)
Press DISPLAY once to display the channel
number, current time, and channel label (if
set). Press DISPLAY again to turn Display off.
Switch the TV’s input to the VCR,
DVD player, or other connected
equipment
Press TV/VIDEO repeatedly to cycle through
the video equipment connected to the TV’s
video inputs.
Change video and audio options,
customize the TV’s setup, set
parental controls, and more
Press MENU to display the Menu. For details,
see “Using the Menus” on page 107.
Switch
the TV’s input between
sources connected to the TV’s
VHF/UHF and CABLE inputs
Press ANT to alternate between sources
connected to the TV’s VHF/UHF and CABLE
inputs.
For a complete list of all
the functions of the
remote control, see
pages 61-67.
z