Filter
Top Products
Other Information
134
SXRD
2-584-141-12(1)
Audio
Channels
Problem Possible Remedies
Good picture, no sound ❏ Press MUTING so that Muting disappears from the screen (see page 62).
❏ Make sure the Speaker option is set to On in the Audio menu (see page 113).
❏ Make sure the MTS option is set to Stereo or Mono (see page 113).
❏ Make sure the speakers are connected correctly (see page 18).
❏ When the HDMI IN input is in use, surround sound, such as AC-3 and DTS,
cannot be input. Change the sound setting for the external input device to Linear
PCM.
Audio noise ❏ Communication problems may occur if infrared communication equipment (e.g.,
infrared cordless headphones) is used near the SXRD projection TV. Please use
headphones other than infrared cordless headphones. Also, if you use infrared
communication equipment other than infrared cordless headphones, move the
infrared transceiver away from the SXRD projection TV until the noise is
eliminated, or move the transmitter and receiver of the infrared communication
equipment closer together.
Cannot gain enough volume
when using a cable box
❏ Increase the volume of the cable box using the cable box’s remote control. Then
press FUNCTION repeatedly until the SXRD projection TV indicator lights up
and adjust the SXRD projection TV’s volume.
Sound seems weak or
insufficient
❏ The SXRD projection TV’s audio might be set to Auto SAP or Mono, when it
might be better set to Stereo. In the Audio menu (see page 113), set the MTS
setting to Stereo. If already set to Stereo, switch to Mono (which may reduce
background noise during weak stereo broadcasts).
Cannot raise the volume on
external speakers
❏ If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
order to output the sound to your audio system), use your audio receiver to adjust
the sound (see page 113). Or, to use the SXRD projection TV remote control, set
the Audio Out option to Variable.
❏ To turn on the SXRD projection TV speakers, set the Speaker option to On (see
page 113).
Cannot switch from Off to On
in the Speaker option
❏ Make sure the speakers are connected correctly (see page 18).
Problem Possible Remedies
Cannot receive upper channels
(UHF) when using an antenna
❏ Press ANT to select the VHF/UHF input (see page 62).
❏ Use Auto Program in the Channel menu to add receivable channels that are not
presently in the SXRD projection TV’s memory (see page 116).
TV is fixed to one channel ❏ Use Auto Program in the Channel menu to add receivable channels that are not
presently in the SXRD projection TV’s memory (see page 116).
❏ Check your Channel Fix settings (see page 116).
Cannot receive any channels
when using cable TV
❏ Use Auto Program in the Channel menu to add receivable channels that are not
presently in the SXRD projection TV’s memory (see page 116).
❏ Press ANT to select the CABLE input (see page 62).