Filter
Top Products
Setting Up the SXRD Projection TV
30
SXRD
2-584-141-12(1)
Installing the SXRD Projection TV
Carrying Your SXRD
Projection TV
Carrying the SXRD projection TV requires at least four people. Do not hold
by the pedestal or the Front Panel Cover of the SXRD projection TV. Doing
so may cause these parts to break off.
As shown in the illustration below, two persons hold the TV by its sides and
the other two by its rear panel. Each person holding the side should use both
hands to grasp the bottom corners of the panel. The other two should place
their hands on the top edge of the TV and the lower part of the rear panel.
✍ Be sure to first remove the speakers before moving the TV.
✍ Make sure the screws underneath the Front Panel Cover are securely
tightened before moving the TV (see Step 6 on page 23).
To carry the TV, hold it by
the top and bottom of the
panel.