Sony RDR-DC100 DVD Recorder User Manual


 
41
Recording to the HDD (“GUIDE Plus+”)
Setting the Timer
Manually (Schedule)
You can set the timer for a total of 32
programmes using the GUIDE Plus+ system
and the Timer List (page 50), up to 30 days
in advance.
Before you start recording…
Check that the HDD has enough available
space for the recording (page 82). You can
open up disc space by erasing titles
(page 67).
b
The recording destination is HDD only.
1 Press TIMER.
The schedule list appears.
2 Press the green button (“Manual”).
3 Set the blue-highlighted date using
the number buttons and </M/m/,.
Then press the green button
(“Next”).
4 Set the start time using the number
buttons and </M/m/,. Then press
the green button (“Next”).
5 Set the stop time using the number
buttons and </M/m/,. Then press
the green button (“Next”).
6 Confirm the input source and press
,, then select the programme
position using the number buttons or
M/m.
7 Press the green button (“Next”).
The display for entering characters
appears. You can change the title name,
if necessary.
8 Press the green button (“Save”).
The date, start and stop times,
programme position, etc. settings
appear.
9 Press the green button (“Frequency”)
repeatedly to set the recording
frequency.
10
Press , to display “Timing,” then
press the yellow button (“Timing”)
repeatedly to adjust the recording
start/end time.
When “Timing” is set to “<5/20>,” the
recording starts 5 minutes before the
scheduled recording start time, and ends
20 minutes after the scheduled recording
end time.
11
Press GUIDE to exit the GUIDE Plus+
system.
The recorder is ready to start recording.
• To modify the timer setting, see page
42.
To stop recording during timer recording
Press x REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
b
The title name may be displayed differently in the
Title List from the one displayed when you set the
timer.
HDD
Date
,continued