Sony RDR-DC100 DVD Recorder User Manual


 
93
Settings and Adjustments
This setting is effective only when you set
“TV Type” to “16:9” in the “Video In/Out”
setup.
Adjust this setting to watch 4:3 aspect ratio
signals. If you can change the aspect ratio on
your TV, change the setting on your TV, not
this recorder.
Note that this setting is effective only for
HDMI connection.
b
This setting is not effective when “HDMI
Resolution” is set to “576p.”
Selects the method of outputting video
signals for the HDMI jack.
b
Some settings may not be available depending on
the connected device.
Audio Input Settings
(Audio In)
You can adjust the sound according to the
playback and connection conditions.
For details on NICAM system, see page 51.
This setting is effective when you record an
analogue broadcast or an external input.
4:3 Video Output
Full Select this when you can
change the aspect ratio on
your TV.
Normal Select this when you
cannot change the aspect
ratio on your TV. Shows a
4:3 size video with the
aspect ratio as it is.
HDMI Colour
Auto Automatically detects the
connected TV type, and
switches to the matching
colour setting.
RGB Select this when connecting
to an RGB device.
16:9 aspect ratio TV
NICAM Select
NICAM Normally select this
position.
Standard Select this if the sound
from NICAM broadcasts is
not clear.
Bilingual Rec. Mode (HDD)
On When recording bilingual
programmes, both main
and sub sounds can be
recorded.
Off When recording bilingual
programmes, only one
sound track (main or sub)
can be recorded.
Set “Bilingual Recording”
to “A/L” (default) or “B/R”
in the “Audio In” setup
(page 94).
,continued