Filter
Top Products
37
Timer Recording
ZWEITON (German stereo) system
When a stereo based programme is received,
“Stereo” appears.
When a bilingual ZWEITON based
programme is received, “Main,” “Sub,” or
“Main/Sub” appears.
NICAM system
When a stereo or bilingual NICAM based
programme is received, “NICAM” appears in
the front panel display.
To record a NICAM programme, be sure to
set “Audio” of “Channel Setting” in the
“Basic” setup to “NICAM” (default). If the
sound is not clear when listening to NICAM
broadcasts, set “Audio” to “Standard” (see
“Channel Setting” on page 57).
z Hint
You can select the audio (main or sub) while
recording bilingual programmes using the AUDIO
button. This does not affect the recorded sound.
Pictures with copy protection cannot be
recorded on this recorder.
When the recorder receives a copy guard
signal, the recorder continues to record but
only a blank, grey coloured screen will be
recorded.
Timer Recording
(Standard/VIDEO Plus+)
You can set the timer for a total of 40
programmes (8 programmes when using the
PDC/VPS function), up to 30 days in
advance.
There are two methods to set the timer: the
standard method and VIDEO Plus+ method.
• Standard: Set the date, time, and
programme position of the programme
manually.
• VIDEO Plus+: Enter the PlusCode
programming number designated for each
TV programme (page 40).
Unrecordable pictures
Copy control
signals
Recordable discs
Copy-Free
Copy-Once None (a blank screen is
recorded)
Copy-Never None (a blank screen is
recorded)
+
RW
+
R
Setting the timer manually
(Standard)
+
R
+
RW
</M/m/,,
ENTER
TIMER
x REC
STOP
OPTIONS
,continued