Sony RDR-GX120 DVD Recorder User Manual


 
39
Timer Recording
If the timer settings overlap
Overlapped timer settings are shown as
follows.
To store the setting as shown, select “OK.”
The programme that does not have a
mark next to it has priority and the
overlapped programmes start recording only
after the first programme has finished.
To cancel the overlapped setting, select
“Cancel.”
To confirm, change, or cancel a timer
recording
See “Checking/Changing/Cancelling Timer
Settings (Timer List)” on page 42.
To extend the recording duration time
while recording
1 Press OPTIONS during recording to
select “Extend Rec,” and press ENTER.
2 Press M/m to select the duration time.
You can set the duration in increments of
10 minutes, for a maximum of 60
minutes.
3 Select “OK” and press ENTER.
One Touch Timer
If you use the SMARTLINK connection, you
can easily display the timer programming
menu.
When the TV is turned on or in standby
mode, press TIMER. The recorder
automatically turns on and the TV’s input is
switched to the recorder. The Timer
programming menu appears.
b Notes
If a message indicating that the disc is full appears
on the screen, change the disc, or make available
space for the recording (DVD+RW only)
(page 55).
Check that the clock is correctly set before setting
the timer recording. If not, the timer recording
cannot be made.
To record a satellite programme, turn on the
satellite tuner and select the satellite programme
you want to record. Leave the satellite tuner
turned on until the recorder finishes recording. If
you connect equipment with a timer function, you
can use the Synchro Rec function (page 44).
Even if the timer is set for the same daily or
weekly programme, the timer recording cannot be
made if it overlaps with a programme that has
priority. “ ” will appear next to the overlapped
setting in the Timer List. Check the priority order
of the settings.
Even if the timer is set, timer recordings cannot be
made while recording a programme that has
priority.
The Rec Mode Adjust function only works with a
timer recording and the PDC/VPS function set to
off. It does not function with Quick Timer or
Synchro Rec.
The beginning of some recordings may not be
made when using the PDC/VPS function.
You cannot extend the recording duration time
when “PDC/VPS” is set to “On.”
,continued