Sony RDR-GX120 DVD Recorder User Manual


 
55
Erasing and Editing
You can select and erase more than one title
at one time using the OPTIONS menu.
1 Press TITLE LIST.
2 Press OPTIONS to select “Erase
Titles,” and press ENTER.
The display for selecting titles to be
erased appears.
3 Select a title, and press ENTER.
A check mark appears in the check box
next to the selected title.
To clear the check mark, press ENTER
again.
To clear all of check marks, select
“Reset.”
4 Repeat step 3 to select all of the titles
you want to erase.
5 When you finish selecting titles,
select “OK,” and press ENTER.
The list of the titles to be erased appears
for confirmation.
To change the selection, select
“Change,” and repeat from step 3.
6 Select “OK” and press ENTER.
The titles are erased.
To erase all titles on the disc
You can reformat a DVD+RW to make the
disc blank.
See “8. Reformatting a disc” on page 35.
You can select a section (scene) in a title and
erase it. Note that erasing scenes in a title
cannot be undone.
1 After step 2 of “Erasing and Editing a
Title,” select “A-B Erase” and press
ENTER.
The display for setting point A appears.
The title starts to play.
To return to the beginning of the title,
press X and then press ..
2 Select point A using m/M, and
press ENTER.
Playback pauses.
3 Press ENTER if point A is correct.
If point A is incorrect, select point A
using c/C, and press ENTER. The
display for setting point B appears.
4 Select point B using m/M, and
press ENTER.
Playback pauses.
5 Press ENTER if point B is correct.
If point B is incorrect, select point B
using c/C, and press ENTER. The
display asks for confirmation.
To reset point A, press M and
O RETURN, and go to step 2.
To reset point B, press M and repeat
step 4.
6 Select “OK,” and press ENTER.
The scene is erased. The display for
setting point A appears.
To continue, go to step 2.
To finish, select “Quit.”
Erasing multiple titles
(Erase Titles)
+
RW
+
R
Erasing a section of a
title (A-B Erase)
+
RW
Playback point
,continued