Filter
Top Products
69
Settings and Adjustments
Channel
Press M/m repeatedly until the programme
position you want is displayed.
The programme positions are scanned in the
order shown in the table below.
• If you know the number of the programme
position you want, press the number
buttons. For example, for programme
position 5, first press “0” and then press
“5.”
• To disable a programme position, enter
“00.” The disabled programme positions
will be skipped when you press PROG +/–.
• To select a cable or satellite programme
position, press M/m until the programme
position you want is displayed.
Name
Changes or enters a new station name (up to
5 characters). The recorder must receive
programme position information (for
instance, SMARTLINK information) for
station names to appear automatically.
To enter characters, see page 29.
Audio
Select “NICAM” or “Standard.”
AFT
Select “On” to turn on AFT.
• If the Auto Fine Tuning function does not
work effectively, select “Off” and press ,.
Press M/m to obtain a clearer picture, and
press <.
Receivable channels
For customers in Australia and New
Zealand
•Australia
NICAM Normally, select this.
Standard Select this if the sound from
NICAM broadcasts is not
clear.
On Turns on the Auto Fine
Tuning function.
Normally, select this.
Off Allows you to adjust the
pictures manually.
TV system Channel coverage
BG
• Malaysia,
Singapore,
Thailand
• Middle East
• Australia, New
Zealand
E2 – E12 VHF
A – H VHF
AS0 – AS12 VHF
NZ1 – NZ11 VHF
E21 – E69 UHF
AS28 – AS69 UHF
S1 – S20 CATV
S1 – S46 CATV
S21 – S41 HYPER
S01 – S05 CATV
I
• Hong Kong
•South Africa
A – J VHF
4 – 13 VHF
B21 – B69 UHF
S1 – S20 CATV
S21 – S41 HYPER
S01 – S05 CATV
Channel Set number Channel
C2 AS0
C3 AS1
C4 AS2
S44 AS3
S46 AS4
S1 AS5
,continued