Filter
Top Products
25
Hookups and Settings
Connecting a PAY-TV/Canal Plus Decoder
You can watch or record PAY-TV/Canal Plus programmes if you connect a decoder (not supplied) to the
recorder. Disconnect the recorder’s mains lead (the power cord) from the mains when connecting the
decoder.
To watch or record PAY-TV/Canal Plus programmes, set your recorder to receive the channels using the
Setup Display. See [Manual CH Setting] in the [General] setup (page 66).
z Hint
You do not need to turn on the recorder to view the signals from the connected tuner on your TV.
b Notes
• To watch or record PAY-TV/Canal Plus programmes from the LINE 1-TV jack, set [Line 3 In] in the [General] setup
to [Decoder] (page 68).
• If you disconnect the recorder’s mains lead (the power cord), you will not be able to view the signals from the
connected decoder.
• To watch the connected external decoder (PAYTV/Canal Plus analogue decoder) programmes while the recorder is
in standby mode, set “Power Save” in the [General] setup to [Off] (default) (page 68).
TV
Aerial cable (supplied)
SCART cord
(not supplied)
PAY-TV/Canal
Plus decoder
to AERIAL
OUT (TO TV)
to LINE 3/
DECODER
DVD recorder
to AERIAL IN
to SCART input
SCART cord
(not supplied)
to
LINE 1-TV