Filter
Top Products
77
Additional Information
The recorder does not start playback from the
beginning.
, Resume play was activated (page 46).
, You have inserted a disc whose Title menu or
DVD menu automatically appears on the TV
screen when it is first inserted. Use the menu to
start playback.
The recorder starts playing automatically.
, The DVD VIDEO features an auto playback
function.
Playback stops automatically.
, If the DVD has an auto pause signal, the recorder
stops playback at the auto pause signal.
Some functions such as Stop, Search, or Slow-
motion Play cannot be performed.
, Depending on the DVD, you may not be able to
do some of the operations above. See the
instructions supplied with the disc.
The language for the sound track cannot be
changed.
, Multilingual tracks are not recorded on the DVD
being played.
, The DVD VIDEO prohibits the changing of the
language for the sound track.
, Try changing the language using the DVD
VIDEO’s menu.
The subtitle language cannot be changed or
turned off.
, Multilingual subtitles are not recorded on the
DVD VIDEO.
, The DVD VIDEO prohibits changing of the
subtitles.
, Try changing the subtitle using the DVD
VIDEO’s menu.
, The subtitles cannot be changed for the titles
recorded on this recorder.
The angles cannot be changed.
, Multi-angles are not recorded on the DVD
VIDEO being played.
, You are trying to change the angles when “ ”
does not appear on the TV screen (page 47).
, The DVD VIDEO prohibits changing angles.
, Try changing the angle using the DVD VIDEO’s
menu.
, The angles cannot be changed for the titles
recorded on this recorder.
The MP3 audio tracks, JPEG image files, DivX
video files do not play.
, The MP3 audio tracks, JPEG image files, DivX
video files are not recorded in a format that the
recorder can play (page 81).
The programme position cannot be changed
from the programme you are recording.
, Set the TV’s input source to “TV.”
Recording does not start immediately after you
press z REC.
, Operate the recorder only after “REAd”
disappears from the front panel display.
Nothing was recorded even though you set the
timer setting correctly.
, There was a power failure during recording.
, The recorder’s internal clock stopped due to a
power failure. Reset the clock (page 67).
, The channel was disabled after the timer
recording was set. See “Channel and Clock
Settings (General)” (page 66).
, Disconnect the mains lead (the power cord) from
the mains, and connect it again.
, The programme contains copy protection signals
that restrict copying.
, Another timer setting overlapped the timer
setting (page 40).
, There is no DVD inside the recorder.
, There is not enough disc space for the recording.
, The disc is protected (DVD-RW (VR mode))
(page 35).
, The recorder was in the process of DV Dubbing
(page 62).
Recording does not stop immediately after you
press x REC STOP.
, It will take a few seconds for the recorder to input
disc data before recording can stop.
On-screen instructions may appear after pressing
x REC STOP. In the case, follow the on-screen
instructions.
Recording/Timer recording/
Editing
,continued